Samsung SyncMaster T200HD User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. T200HD - SyncMaster - 20" LCD Monitor
  6. User manual

Samsung SyncMaster T200HD User Manual

Hide thumbs Also See for SyncMaster T200HD:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
SyncMaster T200HD/T220HD/T240HD/T260HD

LCD Monitor

User Manual

Advertisement

Table of Contents
loading

Related Manuals for Samsung SyncMaster T200HD

Summary of Contents for Samsung SyncMaster T200HD

  • Page 1: Lcd Monitor

    SyncMaster T200HD/T220HD/T240HD/T260HD LCD Monitor User Manual...

  • Page 2: Safety Instructions

    Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage.

  • Page 3: Installation

    Ensure that the power plug is plugged into the power outlet firmly and correctly. • Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Do not connect multiple appliances to the same power outlet. •...
  • Page 4 Keep heating appliances as far away from the power cord or the product as possible. • Do not install it in a badly ventilated location such as a bookcase or closet. • Put down the monitor carefully. • Do not place the front of the product on the floor. •...
  • Page 5 Do not spray cleaner directly onto the surface of the product. • Clean the product using a soft cloth with a monitor cleaner only. If you must use a cleaner other than the monitor cleaner, dilute it with water at a ratio of 1:10. When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth.
  • Page 6 Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. • Otherwise, this may result in electric shock or fire. When you drop the product or the case is broken, turn the power off and disconnect the power cord.
  • Page 7 Set a resolution and frequency appropriate to the product. • Otherwise, your eyesight may be damaged. When using headphones or earphones, do not turn the volume too high. • Having the sound too loud may damage your hearing. If you continually move closer to the product screen, your eye- sight may be failing.
  • Page 8 When replacing the battery, insert it with right polarity (+, -). • Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid. Use only specified standard batteries. Do not use new and used batteries together.
  • Page 9 Do not install the product in a location low enough for children to reach. • Otherwise, it may fall and result in personal injury. • Since the front part of the product is heavy, install the product on a level and stable surface. Do not put any heavy objects on the product.

  • Page 10: Package Contents

    Introduction Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without stand Monitor Manuals Quick Setup Guide Cables D-Sub Cable With stand Monitor...
  • Page 11 Others Remote Control (Not available in all loca- Cable holding ring Note Cleaning Cloth is only provided for highly polished black products as a product feature. Note The Wall Mount of this model is only supported as below. - WMT1900T for 20" ~ 22" - WMB2400T for 24"...

  • Page 12: Your Monitor

    Sold separately Audio cable Your Monitor Front Activates a highlighted menu item. Push the ' Changing the source is only allowed for external devices connected to the product at the time. To switch Screen modes: [PC] → [ TV] → [ Ext.] → [ DVI] → [ Component] → [ HDMI1] → [ HDMI2] MENU Use this button to open the on-screen menu and to exit from the on-screen menu or to close the screen adjustment menu.
  • Page 13 Moves from one menu item to another vertically or adjusts selected menu values. Press to change the channel. Power button [ Use this button for turning the product on and off. Note The button to the right of the monitor are touch-sensitive buttons. Touch a button lightly with your finger.
  • Page 14 Connect the power cord for your monitor to Connect the monitor to your computer. HDMI/DVI-D AUDIO IN / DIGITAL AUDIO OUT(OP- TICAL) / EX-LINK Connect the terminal at the back of your product to your computer’s sound card. Connect the CAL)] terminal of your product to the digital sound output or standard sound output ter- minal of the DVD home theater (or amplifier)
  • Page 15 Connect the DVI cable to the the back of your product. Kensington Lock physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustra- tion depending on the manufacturer.
  • Page 16 ANT IN COMMON INTERFACE HDMI IN 2 / Note See Connecting to PC for further information regarding cable connections. R - AUDIO - L Connect the port of the DVD, VCR (DVD / [ R - AUDIO - L] port DTV Set-Top Box) to the of the product.
  • Page 17 Cable holding ring • Fix the cables using the holding ring, as shown in the figure. Remote Control POWER 2. Number buttons POWER Number Buttons ENTER CH LIST MENU TOOLS Up-Down Left-Right buttons ENTER INFO COLOUR BUTTONS TTX/MIX PRE-CH MUTE SOURCE FAV.CH RETURN...

  • Page 18: Installing Batteries In The Remote Control

    ENTER 5. CH LIST MENU 7. TOOLS Up-Down Left- Right buttons INFO 10. COLOR BUTTON 11. TTX/MIX 12. TV 13. PRE-CH MUTE SOURCE 17. FAV.CH RETURN EXIT 20. SUBTITLE 21. GUIDE Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. Activates a highlighted menu item.
  • Page 19 2. Install two AAA size batteries. Note Make sure to match the +and - ends of the batteries with the diagram inside the compartment. 3. Close the cover. Note Remove the batteries and store them in a cool, dry place if you won‘t be using the remote control for a long time.

  • Page 20: Connecting To A Computer

    Connections Connecting to PC Connecting to a Computer Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card.

  • Page 21: Connecting An Antenna

    • If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status is set to analogue. Press 'SOURCE [ to have the monitor double-check the input signal source. Connecting an Antenna Note You may view television programs on the monitor if it is connected to an antenna or CATV...
  • Page 22 3. Select the appropriate language by pressing the or button. Press the ENTER to confirm your choice 4. Press the button to select Store Demo or Home Use, then the ENTER Note We recommend setting the TV to Home Use mode for the best picture in your home envi- ronment.

  • Page 23: Connecting To Other Devices

    Connecting to other devices Note • This monitor allows the user to connect it to such input devices as a DVD player, a VCR or camcorder or a DTV or TV without disconnecting the PC. • The configuration at the back of the monitor may vary from product to product. Connecting a HDMI cable Note You can connect digital output devices to your monitor.

  • Page 24: Connecting A Component Cable

    3. When all the connections are completed, connect the power cords for the monitor and DVD (or the device connected to the digital output terminal). 4. Select "HDMI" using the 'SOURCE [ Note If you just connect using the DVI to HDMI cable without connecting to the sound source, you cannot hear sound.

  • Page 25: Connecting A Scart Cable

    Connecting a Scart cable Note Connect to the DVD Devices input if the device has a EXT (RGB) jack. You can watch DVD simply by hooking up the DVD player with the monitor as long as the power is on. Connect the EXT (RGB) port of the monitor to the DVD Player using a SCART jack.

  • Page 26: Connecting Common Interface

    Connecting COMMON INTERFACE Note You can install the CAM anytime whether the TV is ON or OFF. Purchase the CI CAM module by visiting your nearest dealer or by phone. Insert the CI CARD into the CAM in the direction of the arrow until it fits. Insert the CAM with the CI CARD installed into the common interface slot.

  • Page 27: Tilt Angle

    Using the Stand Monitor Assembly Tilt angle You can adjust the tilt angle within a range of -1° forward to 21° backward for the most com- fortable viewing angle. Monitor and Bottom...

  • Page 28: Using The Software

    Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ (Worldwide) Installing the Monitor Driver (Automatic) Insert CD into the CD-ROM drive. Click "Windows".

  • Page 29: Installing The Monitor Driver (Manual)

    Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) ® Microsoft Windows Vista™‚ Operating System Insert your Manual CD into your CD-ROM drive.
  • Page 30 This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. Click "Update Driver..." in the "Driver" tab. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer".
  • Page 31 Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. ® ® Microsoft Windows XP Operating System...
  • Page 32 Insert CD into the CD-ROM drive. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon. Click "Display" icon and choose the "Settings" tab then click "Advanced...". Click the "Properties" button on the "Monitor" tab and select "Driver" tab. Click "Update Driver..."...
  • Page 33 If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Click the "Close" button then click "OK" button continually.
  • Page 34 10. Monitor driver installation is completed. ® ® Microsoft Windows 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. Choose "OK" button on the "Insert disk" window. Click the "Browse" button on the "File Needed" window. Choose A:(D:\Driver) then click the "Open"...
  • Page 35 Select the "Monitor" tab. Click the "Change" button in the "Monitor Type" area. Choose "Specify the location of the driver". Choose "Display a list of all the driver in a specific location..." then click "Next" button. Click the "Have Disk" button. Specify A:\(D:\driver) then click "OK"...

  • Page 36: How To Install The Natural Color Software

    & Telecommunications Research Institute (ETRI). This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images. For more information, refer to Help (F1) in the software program.

  • Page 37: Installation Problems

    MultiScreen Installation Insert the installation CD into the CD-ROM drive. Click the MultiScreen installation file. Note If the popup window to install the software for the main screen is not displayed, proceed with the installation using the MultiScreen executable file on the CD. When the Installation Shield Wizard window appears, click "Next".
  • Page 38 Hardware • 32 MB Memory above • 60 MB Hard disk space above Uninstall The Multiscreen program can be removed only by using the "Add or Remove Programs" option of the Windows Perform the following steps remove Multiscreen. Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a pro- gram".

  • Page 39: Adjusting The Lcd Display

    Adjusting the LCD Display Viewing the Menus Button MENU ENTER RETURN EXIT TOOLS Picture Note The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. Input Mode : PC or DVI MagicBright MagicBright is a feature providing optimum viewing environment depending on the contents of the image you are watching.
  • Page 40 TOOLS button to display the Tools menu. You can also set the MagicBright by Press the selecting Tools → MagicBright. • Entertain High Brightness For watching motion pictures such as a DVD or VCD • Internet For working with a mixture of images such as texts and graphics. •...

  • Page 41: Auto Adjustment

    Auto Adjustment The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, auto function is performed. The direct button on the remote control is the 'AUTO' button. TOOLS button to display the Tools menu. You can also set the Auto Adjust- Press the ment by selecting Tools →...

  • Page 42: Picture Options

    Adjusts the screen location horizontally and vertically. • Image Reset Image parameters are replaced with the factory default values. Picture Options • Colour Tone The tone of the color can be changed. Cool / Normal / Warm / Custom • R-Gain , G-Gain , B-Gain Adjusts the individual R, G, B color controls.

  • Page 43: Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/R)

    Input Mode : TV ,DTV ,Ext. ,Component or HDMI Mode The Monitor has three automatic picture settings ("Dynamic", "Standard", and "Movie") that are preset at the factory. You can activate either Dynamic, Standard, or Movie. You can select the type of picture which best corresponds to your viewing requirements. TOOLS button to display the Tools menu.

  • Page 44: Advanced Settings

    Tint(G/R) : Adjusts the colour tint of the picture. (It is activated when the signal is NTSC.) Advanced Settings Samsung‘s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings.

  • Page 45: Flesh Tone

    • R-Offset : Adjusts the red colour darkness. • G-Offset : Adjusts the green colour darkness. • B-Offset : Adjusts the blue colour darkness. • R-Gain : Adjusts the red colour brightness. • G-Gain : Adjusts the green colour brightness. •...

  • Page 46: Screen Mode

    TOOLS button to display the Tools menu. You can also set the size by selecting Press the Tools → Picture Size. • Auto Wide - Automatically adjusts the picture size to the "16:9" aspect ratio. • Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals. •...

  • Page 47: Hdmi Black Level

    Note Picture Size is available in Auto Wide mode This function is not available in PC or Component,Ext., HDMI mode. Digital NR Digital Noise Reduction. If the broadcast signal received by your TV is weak, you can activate the Digital Noise Re- duction feature to help reduce any static and ghosting that may appear on the screen.
  • Page 48 Resets all picture settings to the default values. • Reset Picture Mode : Current picture values return to default settings. • Cancel Note Select a picture mode to be reset. The reset is performed for each picture mode. Sound Note The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.

  • Page 49: Srs Trusurround Xt

    Equalizer You can adjust the left and right sound balance and the low or high volume as you want. The sound settings can be adjusted to suit your personal preference. Mode Selects the sound mode among the predefined settings. Balance Adjusts the balance between the right and left speaker.

  • Page 50: Audio Language

    TOOLS button to display the Tools menu. You can also configure the sound Press the mode by selecting Tools → SRS TruSurround XT • Off / On Audio Language You can change the default value for audio languages. Displays the language information for the incoming stream.

  • Page 51: Audio Description

    Audio Description This is an auxiliary audio function that provides an additional audio track for visually chal- lenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Descrip- tion On or Off and control the volume.

  • Page 52: Speaker Select

    Speaker Select When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home theater‘s (external) speakers. • External Speaker : Used to listen to the sound of the external (Home Theater) speakers. •...
  • Page 53 NICAM Stereo Note If the stereo signal is weak and an automatic switching occurs, then switch to the mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal. This function is only available in TV mode. Channel Note The default setting may be different depending on the selected Input Mode (input signal...

  • Page 54: Auto Store

    Auto Store You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired pro- gramme numbers. Note If a channel is locked using the Child Lock function, the PIN input window appears. Air / Cable Antenna source to memorize.

  • Page 55: Manual Store

    Manual Store You can scan the frequency ranges available on your television in your area and store all the channels found manually. Digital Channel Manual store for digital channels. • Channel : Set the Channel number using the • Frequency : Set the frequency using the number buttons. •...

  • Page 56: Cable Search Option

    You can store television channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The Programme number of each stored channel which you wish to identify - C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

  • Page 57: Now & Next Guide

    The EPG (Electronic Programme Guide) information is provided by the broadcasters. Pro- gramme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available Note You can also display the guide menu simply by pressing the GUIDE button.

  • Page 58: Default Guide

    To... Toggle between the Now & Next Guide or Full Guide Scrolls backwards quickly (24 hours) Scrolls forward quickly (24 hours) Exit the guide Note The programme title is on the upper part of the screen center. Please click on for the detailed information.
  • Page 59 Added Channels Shows all added channels. Favourites Shows all favourite channels. Note To select the favourites channels you have set up, press the FAV.CH button on the remote control. When it has finished, channels are updated in the channel list Programmed Shows all current reserved programmes.

  • Page 60: Lock / Unlock

    • : A programme currently being broadcast. • : A locked channel. • : A reserved programme. Channel List Option Menu (in All Channels / Added Channels / Favourites) Add / Delete You can delete or add a channel to display the channels you want. Note All deleted channels will be shown on All Channels menu.
  • Page 61 Timer Viewing If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To re- serve a programme, set the current time first. Note Only memorized channels can be reserved.

  • Page 62: Select All

    Note TOOLS button to use the option menu. Press the Change Info Select to change a viewing reservation. Cancel Schedules Select to cancel a viewing reservation. Information Select to view a viewing reservation. (You can also change the reservation information.) Select All Select all reserved programmes.

  • Page 63: Plug And Play

    Fine Tune If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. Note Fine tuned channels that have been saved are marked with an asterisk “...

  • Page 64: Clock Mode

    Language You can set the menu language. The language chosen affects only the language of the OSD. Time Clock Setting the clock is necessary in order to use the various timer features of the TV. The current time will appear every time you press the If you disconnect the power cord, you have to set the clock again.

  • Page 65: Sleep Timer

    Note This function is only available when Clock Mode is set to manual. You can set the day, month, year,hour and minute directly by pressing the number buttons on the remote control. Sleep Timer Use to set the Monitor to be turned off automatically in certain minutes. TOOLS button to display the Tools menu.

  • Page 66: Game Mode

    Auto Power Off - When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time Game Mode When connecting to a game console such as PlayStation™...

  • Page 67: Change Pin

    This feature allows you to prevent unauthorized users, such as children, from watching un- suitable programme by muting out video and audio. • Off / On Note Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.

  • Page 68: Subtitle Language

    This feature allows you to prevent unauthorized users, such as children, from watching un- suitable programme by a 4-digit PIN (Personal Identification Number) code that is defined by the user. • Allow All : Press to unlock all TV ratings. •...

  • Page 69: Teletext Language

    You can select these options simply by pressing the Teletext Language You can set the Teletext language by selecting the language type. Note English is the default in cases where the selected language is unavailable in the broadcast. Preference Primary Audio Language / Secondary Audio Language / Primary Subtitle Language /Secondary Subtit Using this feature, users can select one of the languages.

  • Page 70: Digital Text

    Digital Text If the programme is broadcast with digital text, this feature is enabled. • Disable / Enable (UK only) Note MHEG (Multimedia and Hypermedia Information Coding Experts Group) An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data.

  • Page 71: Energy Saving

    A melody sound can be set to come on when the monitor is powered On or Off. • Off : Turns off the melody function. • Low : Sets the melody volume to low. • Medium : Sets the melody volume to medium. •...

  • Page 72: Application Info

    Common Interface CI Menu This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card. Application Info. This contains information on CAM inserted in the CI slot and displays it. The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the TV is ON or OFF.

  • Page 73: Anynet+ (Hdmi-Cec)

    Anynet+ is a function that enables you to control all connected Samsung devices thatsupport Anynet+ with your Samsung TV‘s remote. The Anynet+ system can be used onlywith Sam- sung devices that have the Anynet+ feature. To be sure your Samsung devicehas this feature, check if there is an Anynet+ logo on it.

  • Page 74: Setting Up Anynet

    HDMI IN (1 or 2) jack on the TV and the HDMI OUT jack of the corresponding 1. Connect the Anynet+ device using an HDMI cable. HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding 2.

  • Page 75: Anynet+ (Hdmi-Cec)

    Anynet+ (HDMI-CEC) To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. Note When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Auto Turn Off Setting an Anynet+ Device to turn Off automatically when the TV is Turned Off and setting a TV to turn off automatically when a HDMI-CEC device requestes tv to turn off.

  • Page 76: Support

    • Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with the TV. Contact Samsung‘s call centre for assistance. • No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment.

  • Page 77: Software Upgrade

    Continue to adjust the antenna until you find the best position with the strongest signal. Software Upgrade Samsung may offer upgrades for TV‘s firmware in the future. BY Channel Upgrades the software using the broadcasting signal.

  • Page 78: Contact Samsung

    Adjusting the LCD Display Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call centre, product and software file download method.newer the software version. Installing the latest version is.

  • Page 79: Troubleshooting

    Troubleshooting Self-Test Feature Check Note • Check the following items yourself before calling for service. Contact the service center for problems that you cannot solve by yourself. • Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.

  • Page 80: Symptoms And Recommended Actions

    • Do not use benzene, thinner or other flammable sub- stances, or a wet cloth. • We recommend a Samsung cleansing agent is used to prevent damage to the screen. • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen surface.)
  • Page 81 PC Mode It appears the PC does not function normally. Check if the Display Adapter Driver (VGA Driver) is properly installed. (Refer to Installing Driver) The monitor screen flickers. Check if the signal cable between the computer and the monitor is securely connected and tightened.(Refer to Connecting the monitor) TV Mode TV screen is blurred or shows noise signals.

  • Page 82: Problems Related To Audio

    Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes. The image is too light or too dark Adjusts the Brightness and Contrast.
  • Page 83 5. You may see small particles if you look closely at the edge of the bezel surrounding the screen. This is part of the product’s design and is not a defect. Q & A How can I change the frequency? The frequency can be changed by reconfiguring the video card.
  • Page 84 or drama or you can buy home shopping products such as an accessory currently on Digital TV broadcasting allows you to easily access various information services in your home creating a more information-oriented home. Can I watch digital TV broadcasting with an analog TV? The analog TV cannot interpret digital signals.

  • Page 85: Specifications

    Specifications General SyncMaster T200HD / SyncMaster T220HD / SyncMaster Model Name T240HD / SyncMaster T260HD LCD Panel Size Display area Pixel Pitch Display Color 16.7M Maximum Pixel Clock 146.250 MHz (Analog, Digital) T200HD Resolution Optimum resolution Maximum resolution 1680 x 1050 @ 60 Hz Dimensions (W x H x D) / Weight 486 x 350 x 75 mm / 19.1 x 13.8 x 3.4 inch (Without Stand) 486 x 417.5 x 215 mm / 19.1 x 16.4 x 8.5 inch (With Stand) / 5.6...
  • Page 86 Maximum Pixel Clock 162.000 MHz (Analog, Digital) Resolution Optimum resolution Maximum resolution 1920 x 1200 @ 60 Hz Dimensions (W x H x D) / Weight 573 x 409 x 87 mm / 22.6 x 16.1 x 3.4 inch (Without Stand) 573 x 477 x 245 mm / 22.6 x 18.8 x 9.6 inch (With Stand) / 7.3 kg / 16.1 Ibs LCD Panel...
  • Page 87 Environmental considerations Operating Storage Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interac- tion of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings.

  • Page 88: Preset Timing Modes

    This monitor is EPA ENERGY STAR ENERGY 2000 compliant when used with a computer equipped with VESA DPM functionality. ® As an ENERGY STAR Partner, SAMSUNG has deter- mined that this product meets the ENERGY STAR guidelines for energy efficiency. Horizontal Vertical Fre-...
  • Page 89 Display Mode VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 VESA, 1280 x 960 VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1680 x 1050 T240HD, T260HD Display Mode...
  • Page 90 Specifications Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Hor- izontal Cycle is called the Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the...

  • Page 91: For Better Display

    Information For Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT- LCD.
  • Page 92 Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. What is Image retention ? During normal operation of a LCD panel, pixel image retention doesn't occur. How- ever, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal.
  • Page 93 • Avoid: Colors with big difference in luminance (Black & White, Grey) • Recommended settings: Bright colors with little difference in luminance • Change the characters color and background color every 30 minutes • Every 30 minutes, change the characters with movement. The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it.
  • Page 94 Information Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II...
  • Page 95 Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. U.S.A CANADA MEXICO ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PUERTO RICO REP.
  • Page 96 022 - 607 - 93 - 33 PORTUGAL (7267864) SLOVAKIA 0800-SAMSUNG (726-7864) http://www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG(902 172 678) SWEDEN 075 - SAMSUNG (726 78 64) http://www.samsung.com/se SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) 0845 SAMSUNG (7267864) ESTONIA 800-7267 LATVIA 8000-7267...
  • Page 97 010-6475 1880 HONG KONG:3698 - 4698 http://www.samsung.com/hk 3030 8282 http://www.samsung.com/in 1-800-3000-8282 1800 110011 0800-112-8888 http://www.samsung.com/id 0120-327-527 http://www.samsung.com/jp 1800-88-9999 http://www.samsung.com/my 0800 SAMSUNG(0800 726 http://www.samsung.com/nz 786) 1-800-10-SAMSUNG http://www.samsung.com/ph (726-7864) 1-800-3-SAMSUNG (726-7864) 02-5805777 1800-SAMSUNG(726-7864) http://www.samsung.com/sg 1800-29-3232, 02-689-3232 http://www.samsung.com/th 0800-329-999 http://www.samsung.com/tw 1 800 588 889 http://www.samsung.com/vn...
  • Page 98 Dot Pitch Vertical Frequency Horizontal Frequency Interlace and Non-Interlace Methods Plug & Play Resolution RF Cable Satellite Broadcasting Cable TV CATV it to the monitor. The monitor displays the color signals by separating the composite signal into original color signals. The image on a monitor is composed of red, green and blue dots.
  • Page 99 14 through 69. This feature allows the viewer to fine-tune the TV channel to obtain the best viewing conditions. The Samsung LCD TV has both automatic and manual channel fine-tuning features to enable the viewer to adjust their desired settings.

  • Page 100: Correct Disposal

    HDMI(High Definition Multi- media Interface) SRS TS XT Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) This is an interface that connects both quality video signals and digital audio signals with a cable without any compres- sion.
  • Page 101 Reproduction in any manner whatsoever without the written permission of Samsung Elec- tronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this ma- terial.

This manual is also suitable for:

Syncmaster t220hdSyncmaster t240hdSyncmaster t260hd

Table of Contents