Symptoms And Recommended Actions; Check List - Samsung SyncMaster T200HD User Manual

2. Maintaining the Flat Panel Display Screen.
Clean with a soft cloth (cotton flannel) smoothly.

Symptoms and Recommended Actions

Note
A monitor recreates visual signals received from the computer. Therefore, if there is trouble
with the computer or the video card, this can cause the monitor to become blank, have poor
coloring, noise, Video mode not supported, etc. In this case, first check the SOURCE of the
problem, and then contact a service center or your dealer.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request an after-service for the main board of the computer.)
3. If you installed a new video card or if you assembled the PC, check if you installed the
adapter(video) driver and the monitor driver.
4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz.
(Do not exceed 60 Hz when using the maximum resolution.)
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe
Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and
then reboot the computer to reinstall the adapter (video) driver.

Check List

Note
Before calling for assistance, check the information in this section to see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the In-
formation section or contact your dealer.
1. Problems related to Installation
Note
Problems related to the monitor installation and their solutions are listed.
Troubleshooting
• Do not use benzene, thinner or other flammable sub-
stances, or a wet cloth.
• We recommend a Samsung cleansing agent is used
to prevent damage to the screen.
• Never use acetone, benzene or thinner.
(They may cause flaws or deformation of the screen
surface.)
• The user will be required to pay costs and related ex-
penses for repair of damages caused by him/her.