Connecting A Component Cable - Samsung SyncMaster T200HD User Manual

3. When all the connections are completed, connect the power cords for the monitor and
DVD (or the device connected to the digital output terminal).
4. Select "HDMI" using the 'SOURCE [
Note
If you just connect using the DVI to HDMI cable without connecting to the sound source,
you cannot hear sound.
Connecting the audio output terminal of a digital device to the
PONENT IN] of the monitor using an audio cable will not give you sound. Make sure to
connect to the

Connecting a Component cable

Note
Connect to the DVD / DTV Set Top Box input if the device has a [COMPONENT IN] connector.
You can watch Component simply by hooking up the Component with the monitor as long as
the power is on.
Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the
the monitor.
Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the
using a component video cable (P
Note
Select "Component" using the 'SOURCE [
If you connect the P
be displayed in red or blue.
For single-family houses, install an UHF antenna to receive digital broadcasting.
Connections
[HDMI / PC/DVI-D AUDIO IN] terminal of the monitor.
, P ,Y).
R B
, P , and Y component cables to the incorrect terminals, the screen will
R B
]' button.
]'
[R-AUDIO-L] of [COM-
[R-AUDIO-L] port of
[P , P ,Y] input ports
R B