Scandomestic SKF 334 W User Manual page 23

Carefully wipe dry the door gasket, clean the groove using a wooden chopstick wrapped with cotton string. After the
cleaning, fix the four corners of the door gasket first, and then embed it segment by segment into the door groove.
Interruption of power supply or failure of the refrigerating system
•Take care of the frozen foods in the event of an extended non-running of the refrigerating appliance (such as interruption
of power supply or failure of the refrigerating system).
•Try to open the refrigerator door as less as possible, in this way can food safely and freshly kept for hours even in hot
summer.
•If you get the power outage notice in advance：
1) Adjust the thermostat knob to the high mode an hour in advance, so that foods get fully frozen (Do not store new
food during this time!). Restore the temperature mode to the original setting when power supply becomes normal in a
timely manner.
2) You can also make ice with a watertight container, and put it in the upper part of the freezer, so as to extend the time
for fresh food to be stored.
Note: Once the refrigerator is used, you'd better use it continuously; and under normal circumstance, do not
stop its use, so as not to affect the service life.
Defrosting
This appliance is designed with automatic defrosting function, thus no need to defrost it manually.
Changing the lamp
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In case
of any abnormality, please contact the after-sales personnel for visiting service.
Lamp type ： LED light.
Energy efficiency level ： F
Safety-check after maintenance
Is the power cord broken or damaged?
Is the power plug firmly inserted into the socket?
Is the power plug abnormally overheat?
Note: Electric shock and fire accident may be caused in case the power cord and plugs are damaged or
stained by dust. If any abnormality, please unplug the power plug and get in contact with the vendor.
How to dissemble the parts
Fridge door bottle rack:
Hold the bottle rack with both hands, and then push it up.
Fridge shelf:
Hold one end of the shelf to lift it up, and meantime pull it outward, in this way can the shelf be taken out.
Simple fault analysis and elimination
With regard to the following small faults, not every failure needs to be fixed by the technical service personnel; you can try
to solve the problem.
Case Inspection
•
●Completely
•
non-refrigeration
•
•
•Abnormal noise
•
•
•
Poor
•
refrigerating
•
efficiency
•
•
•
Is power plug off?
Are breakers and fuses a broken?
No electricity or line trip?
Is refrigerator stable?
Does refrigerator reach the wall?
Do you put hot food or too much food?
Do you open the door frequently?
Do you clip food bag to the seal of door?
Direct sunlight or near a furnace or stove?
Is it well-ventilated?
Temperature setting in too high?
Solutions
•
Re-plug.
•
Opening the door and checking whether the
lamp is lit.
•
Adjusting refrigerator's adjustable feet.
•
Off the wall.。
•
Putting food into refrigerator when hot food
becomes cool.
•
Checking and closing the door.
•
Removing the refrigerator from the heat
source.
•
Emptying the distance to maintain good
ventilation.
•
Setting to the appropriate temperature.