Table of Contents
Advertisement
2. Physical Product Features
2.1. BL-819 / 830
2.2. Comparison of BL-819 and BL-830 Features
The BL-819 and BL-830 adapters share almost identical features, with the only difference being the gender
of the adapter. The BL-819 is 9-pin male (DTE) with the BL-830 being female (DCE).
The main anticipated use of BL-819 is to be connected to a DCE device that would normally plug into the
back of a PC. If you wish to use BL-819 as a DCE device (e.g. to plug into the back of a PC or similar for
configuration) you should use the included "gender changer".
The BL-830 is supplied with a DCE connector (female) and no gender changer is supplied. This device will
plug into any serial port on a PC or Laptop.
2.3. BL- 819 / 830 Power Options
The BL-819 & BL-830 also carry the ability to be powered through Pin 9 by a suitable serial port. This
negates the need for an external power source. Brainboxes offer two serial cards, which can perform this function
for the BL-830, UP-189 and UP-200. NB. The BL-819 can be powered through Pin 9, but not with the supplied
gender changer. For information of the power requirements of your RS-232 Bluetooth Adapter, please see the
Input Voltage Requirements in the Technical Specification Section.
Manual for BL-819 / 830
© Copyright Brainboxes Limited 2005
Reset button
See section 6 for more details on how to use
the reset button.
LED
The Green LED on the top of the device
indicates the current device status. There are
3 states that the light will indicate;
Permanently On – The device has power but
no Bluetooth Connection
Flashing – The device has power and has a
Bluetooth Connection
On when power is applied, then permanently
off – This occurs when the device is in
Upgrade mode.
Page 5 of 41
Advertisement
Table of Contents
