Command Interface - Brainboxes BL BL-830 Product Manual

4.3. Command Interface

This interface has been developed primarily to support programming access to the configuration settings by an
application such as our own configuration application, but can also offer a powerful human operated (e.g. via
HyperTerminal) command driven interface in it's own right. Additionally, the commands can be placed in a
Text/script file and sent (e.g. by HyperTerminal) in one go to the adapter. The "scr" command is strongly
recommended for use in this scenario.
The command interface protocol is quite straightforward. Each command (see table and descriptions below) must
be sent over the COM port, followed by a Carriage return <CR>. This can be done in HyperTerminal just by typing
each command and hitting the Enter key.
There are up to 3 ways each command can be used.
1. On its own. This acts as a "query" command.
e.g. cod<CR>
Returns the current device class
2. With an "=" and parameter(s). This acts as a "set" command
e.g. cset=9600,n,1<CR>
Sets the current settings to 9600 baud, No Parity and 1 Stop Bit
Not all commands support this function as they are query commands only
3. With a "?" which acts as a "help" command
e.g. svc?<CR>
Returns a description of the command syntax and allowable parameters
The command list summary is given below.
Command Description
Name
aset Get all settings
btset
Get current Bluetooth settings
cnx Manually connect to a found device
cod Class Of Device
cset
Communication Settings
delpair Delete the current pair
delpart Delete the current Partner
dflt
Default settings
disc
Discoverability
enc Encryption
find Manually perform an inquiry
help or ? Help
hsk Handshaking
ladd Local device address
list List the manually-found devices
lowpwr Low Power Mode
lnam Local device name
menu
Display Menu
The full command list syntax and programming examples will be given in a future edition of this manual. In the
meantime, this information can be found using the help or ? command in HyperTerminal when your Adapter is
attached to an available COM port.
Manual for BL-819 / 830
Command
Name
padd
pair
parkset
part
pin
pnam
prox
remcfg
scr
sec
sniffset
switchrole
svc
svr
upg
ver
verb
© Copyright Brainboxes Limited 2005
Description
Partner Address
Pair
Park Settings
Partner
PIN code
Partner Name
Set the proximity mode
Remote Configuration
Script Mode
Security
Sniff Settings
Switch Role On / Off
Connect Using profile other than SPP
Server or Client
Prepare for upgrading
F/W app version
Verbose
Page 27 of 41