General Information; System Features; Gsmvlp-Adt Module Kit; Installing The Gsmvlp-Adt Module - ADT GSMVLP- Installation And Programming Manual

GENERAL INFORMATION

The GSMVLP-ADT is an optional communication module intended for use with ADT
3000
control panels, and provides wireless communication with the ADT network for delivery of alarm
and other messages to the monitoring central station.
The GSMVLP-ADT cellular communication module transmits signals via the GSM cellular network,
using GPRS, and forwards them to your Central Station.

System Features

•
Quick connection to compatible ADT
•
Simple programming using a 7720P programming tool or via the AlarmNet Website
•
Reports fire, burglary, and status messages via GSM
•
Allows uploading and downloading of control panel data via GSM
•
Uses 2-way ECP communication with the control.
•
Enables two-way voice (AAV) communication between the control and central station via GSM
•
Sends reports in Contact ID format
•
Supports remote control of alarm system via Remote Services Feature
•
Fully powered (primary and backup battery) from the control
The GSMVLP-ADT provides the following types of supervision and module fault detection:
•
Network communication failure: In the event the ADT network does not hear a supervisory
message from the module within a specified time ("Supervision" option, 24 hours, 30 days, or none),
the network notifies the central station of a communication failure.
•
Communication path failure: In the event the module detects a communication path failure, the
control panel can be notified of a trouble condition with the module after a specified time has
elapsed.

GSMVLP-ADT Module Kit

This kit contains the following components:
AUDIO CABLE (PART NO. 600-00170)
GSMVLP MODULE

Installing the GSMVLP-ADT module

QuickConnect 3000
INCLUDED WITH GSMVLP-KT
Figure 1 – GSMVLP-ADT Kit Components
– 3 –
QuickConnect
control panels
SCREWS (3)
ECP/POWER CABLE
NYLON TIE WRAP (2)
TIE WRAP
MOUNT
GSMVLP-003-V0