7
Setup and Reset
7.1
HUB
Configure the settings to use the HUB function on the product.
Refer to "2.1 About "HUB Monitor"" for details about how to use the
To open the
7.1.1 USB Connection
You can view the USB cable connection status between the product and a PC.
The connection status will be shown even when the input source is not
Selecting the
source to
Configuring USB Connection
1
m
Press [
] on the product.
2
Press [
3
Press [
USB cable is connected or disconnected.
4
If a USB cable is connected, press [
source will change to
7.1.2 Analog
You can view the
The connection status will be shown even when the input source is not
Selecting the
Analog
HUB
settings screen, press
USB Connection
option when a USB cable is connected will change the input
USB
mode.
] to move to
SETUP&RESET
] to move to
HUB
and press [
USB
mode.
HUB
USB Connection
Analog
HDMI
USB Super Charging
Return
Analog
cable connection status between the product and a PC.
Analog
option when an analog cable is connected will change the input source to
mode.
HUB
on the stand.
and press [
] on the product.
] on the product. A message will appear indicating that a
] to move to
USB Connection
Connected
Disconnected
Disconnected
Move
Enter
HUB
function.
USB
mode.
and press [
]. The input
Analog
mode.
61
7 Setup and Reset