Table of Contents
Advertisement
2
Using "HUB Monitor"
Note that the battery will not be charged if the power cable is disconnected from the power socket.
USB CABLE
Connect multiple source devices to the product and use the device you want by changing the input
source.
2.4.2 Connecting to a LAN
"HUB Monitor" allows you to use the Internet from a PC when you connect a LAN cable to the product (if
the product is connected to the PC), without having to connect the LAN cable directly to the PC.
This is achieved by an internal chip that transmits data received via the LAN cable to the PC as a
converted USB signal.
Connecting to a LAN via USB cable
LAN
This product cannot connect to multiple source PCs at the same time and vice versa.
2.5
Configuring the HUB Monitor IP
1
After installing the integrated driver for HUB Monitors, go to Control Panel
Internet
→
2
You can see that the following two devices are displayed.
a.
The user PC's network device
b.
The HUB Monitor's network device (USB to Ethernet adapter)
The two devices above refer to your PC's LAN network device and your HUB Monitor's network
device.
Network and Sharing Center
HDMI
USB CABLE
→
Change adapter settings.
2 Using "HUB Monitor"
→
Network and
30
Hide quick links:
Advertisement
Table of Contents
