Operation - HAMPTON BAY DIY-300PS Use And Care Manual

Operation

1
Setting the Clock
This setting allows you to set the clock to local time.
a) Press MENU until CLOCK LED indicator is lit and the digit indicator
is flashing. Then press OK.
b) When AM and PM begins to flash, press the UP or DOWN arrow
button to select AM or PM and press OK.
c) When the Hour begins to flash, press the UP or DOWN arrow to
desired hour and press OK.
d) When the Minute begins to flash, press the UP or DOWN arrow to
desired Minute and press OK.
e) The Clock setting is now complete.
NOTE: To scroll through the clock settings more
quickly, press and hold down the UP and DOWN
arrows.
3
Setting PHOTOCELL AUTO ON/OFF
This setting allows the photocell to turn the lights on at dusk and off
at dawn.
a) Press MENU until the PHOTOCELL AUTO ON/OFF LED indicator is lit
and then press OK. The PHOTOCELL AUTO ON/OFF mode is now
activated. The digit display shows the current time and the AM/PM
LED indicator stays lit.
b) The start delay time is 0.1 sec. ± 1 sec. ; The off delay time is 60
sec. ± 10 sec.
2
Operating in Manual Mode
This setting allows you to immediately turn the lights on and turn them
off when you no longer need them.
a) Press MENU until MANUAL ON/OFF LED indicator is lit and then
press OK.
b) The MANUAL ON/OFF mode is now set to ON. Press the UP arrow
button to turn on the lights. Press the DOWN arrow button to turn off
the lights.
4
Setting PHOTOCELL ON / TIME OFF
This setting allows the photocell to turn the lights on and you set the
time they go off.
a) Press MENU until the PHOTOCELL ON / TIME OFF LED indicator is lit
and press OK. The display shows "OFF"and press OK.
b) When AM and PM begins to flash, press the UP or DOWN arrow
button to select AM or PM and press OK.
c) When the Hour begins to flash, press the UP or DOWN arrow to
desired hour and press OK.
d) When the Minute begins to flash, press the UP or DOWN arrow to
desired Minute and press OK.
e) The setting is now complete. The PHOTOCELL ON/ TIMER OFF LED
indicator stays lit and the display shows the current time. The lights
will automatically turn on at night and will turn off on the setting
time.
8