Operation - HAMPTON BAY SL-60-12-SV Use And Care Manual

Operation

ON AT DUSK/OFF AT DAWN
1
(Factory default setting)
In this mode, the landscape lights will automatically come
on at dusk and turn off at dawn.
Press ON AT DUSK /OFF AT DAWN button, the related
indicator light will illuminate and "AU" (Auto) will display
on screen. This mode is now active.
NOTE:The photocell sensor should be installed and
secured tightly before transformer operation is set
3
MANUAL ON/OFF
In this mode, the landscape lights can be turned on & off
manually.
Press the MANUAL ON/OFF button, the related indicator
light will illuminate. The transformer has now entered
MANUAL ON/OFF MODE. Display will first show OFF
mode, press button again to toggle landscape lights ON.
NOTE:After 30 seconds the transformer display will go
into standby mode, press any button to remove
transformer from standby mode
NOTE:Transformer will retain settings in the event of
complete power loss
2
ON AT DUSK /RUN TIME
In this mode, the landscape lights will automatically turn on at
dusk and off after the set time (hrs).
Press ON AT DUSK /RUN TIME button, the related indicator
light will illuminate. Increase RUN TIME by pressing ON AT
DUSK/RUN TIME button repeatedly until desired RUN TIME
is displayed (The time will be displayed as 1,2,...,12 hours).
NOTE:The photocell sensor should be installed and
secured tightly before transformer operation is set
4
Restore factory function
In any mode, press & hold MANUAL ON/OFF button for 10
seconds, "88" will be displayed on the screen and all the
indicator lights will illuminate. The transformer will reset to
ON AT DUSK /OFF AT DAWN mode.
8