Table of Contents
Advertisement
Problem
Cannot toggle between CRT
and LCD while playing the
3D game.
There is LCD or CRT has
noise (speckles, lines or
raged edges) on the
picture when playing a
MPEG file with the Media
player/ DVD software or
using the USB camera.
In DOS mode the CRT/LCD
button does not work.
If the connected CRT
monitor display is not steady.
66 Users Manual
Action
If you are using the Multimonitor mode, you can not
use the <Fn+F5> key combination and also you
cannot use this function in 3D games using Direct-
X.
Adjust the resolution and the colour to 1400 x 1050
and 32 bit to display clearly, or avoid playing two
programs at the same time.
The LCD only mode is not supported using this Key
combination.
If the refresh rate is not optimal for the connected
CRT, then this problem may occur.
To correct this problem do the following:
1.Click Start > Settings > Control Panel.
2.Double Click the Display icon to open the Display
properties.
3.Select Settings
4.Click the Advanced button.
5.Click the Adapter tab
6.Adjust the Refresh rate to optimal or other selections
until you see the CRT clearly.
Advertisement
Table of Contents
