Table of Contents
Advertisement
on the Profile Name. Then the Activate or Edit a Preferred Profile window
appears. Select Activate Profile and then click OK.
Using a wireless network with the wireless LAN setup
program.(for an 11g card)
For operating systems other than Windows XP, the installation of the wireless LAN
setup program and the configuration of the wireless network environment are required.
For an 11b card, see (p 43).
To use a wireless network, complete the following procedures.
•
Step1. Install the MagicLAN5 utility program.
•
Step2.
Construct a wireless network.
To connect to a peer-to-peer wireless network, complete the following
procedures on both target computers.
Step 1. Installing the MagicLAN5 Utility Program
Install the "MagicLAN5 Utility" program from the System Software CD to the
computers to be connected to the network.
Step 2. Using the MagicLAN5 Utility
Double-click the wireless LAN program (
(Or, click
Start > Programs > MagicLAN5 > MagicLAN5 Utility > MagicLAN5 Utility
Configure the wireless network settings through the MagicLAN5 Utility according to
the following procedures.
To connect to an Access Point:
To connect to an access point or to connect to an already existing Ad Hoc network,
refer to the following instructions. (To create a new Ad Hoc network, refer to the
following instructions about Ad Hoc networks.)
) icon on the Taskbar.
Connecting to the Internet 45
)
Advertisement
Table of Contents
