Table of Contents
Advertisement
Q6 The Wireless network connection operates properly, but the Wireless
Network Connection icon on the Taskbar displays the "Disconnected"
message.
A
This is one of the known problems when you are using a wireless LAN
connection after installing Windows XP service pack 1.
For more information, refer to the following link for known problems with
Microsoft.
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q328647
Q7 When connecting to a computer-to-computer (Ad Hoc) network, I cannot
connect to another computer connected to the same computer-to-computer
network.
A1
Click the Refresh button to search for AP's again. (A link to the Refresh button
is required)
A2
Make sure that the security settings and network name of the computer-to-
computer (Ad Hoc) network is correct.
A3
Check the TCP/IP properties of the computers to be connected through the
computer-to-computer (Ad Hoc) network. All of the computers to be connected
through a computer-to-computer (Ad Hoc) network should be configured so that
their IP addresses are within the same subnet range.
- If the IP address is configured to DHCP (Obtain an IP address automatically) in
TCP/IP properties, IP address is configured within the same subnet range
automatically.
- If the IP address is configured to static IP in TCP/IP properties, select Use the
following IP address in the TCP/IP properties of the wireless adapter, configure
IP address:10.0.0.1~10.0.0.254, and Subnet mask: 255.255.0.0, and then try
again.
Q8 The network does not operate properly when both the wireless and the wired
network connections are simultaneously configured with the same IP
address.
A
You cannot use the wireless and the wired network connections using the same
IP address simultaneously. To use either the wireless or the wired network in turn
with the same IP address, you have to Disable whichever network device will not
be using in the network connection of the Control Panel.
92 Users Manual
Advertisement
Table of Contents
