Ι Ι
Disassemble and reassemble
Stop operation of the air conditioner and remove the power cable before repairing the unit.
1 Indoor unit
If you disassemble the heat exchanger, you must pump down at first.
No.
Part
1
Front Panel
4
Procedure
1) Stop the operation of the air conditioner
and block the main power.
2) Separate the tape from the front panel.
3) Contract the second finger to the left,
and right handle. And pull the inlet grille
to open.
4) Take the left and right filter out.
*Taking off the deodorizing and
Electrostatic filter out. (Option)
5) Loosen one of the right screw and
separate the terminal cover.
6) Loosen three screws of front grille.
Remark