Samsung AS18A9RCF Service Manual page 14

Hide thumbs Also See for AS18A9RCF:

Table of Contents

Step 3

Reconfirming the option set after completing

Example : 000000-1700b7

Press the

button for the "

Press the

button for the " " mode and the display will be shown as

Step 4

Pressing the

When pressing the

it sounds beep or ringing and the first LED(STANDARD) lamp on the left side is

flickering at the same time, then the input option is completed. If it doesn't sound

ringing, try again by pressing the

Step 5

Testing the unit

1 Remove the battery from the remote control.

2. Insert the battery into the remote control.

3. Press the

(On/Off)button in the direction of the remote control for set.

N N

o o

t t

e e

Error mode

1. If all lamps of the indoor units are flickering, plug out and in again and press the

(On/Off) button again.

2. If the unit doesn't work properly or all lamps are continuously flickering after setting the option

code, check that the option code is set properly for its own model.

7) If the first number is , it is correct. Otherwise, press the

until

appears.

8) When pressing the

9) When pressing the

10) When pressing the

11) When pressing the

12) When pressing the

" mode and the display will be shown as

(On/Off) button

(On/Off)button in the direction of the remote control for unit,

(On/Off)button.

button