Table of Contents
Advertisement
Chapter 7
Using Interaction Pages
Accessing Displays
Using Interaction Page 9 Display with a Workstation
You may access Interaction Page displays 9 through 13 from the
maxSTATION to view information and data specifically related to the DPU.
These specific Interaction Pages are covered in this chapter in some detail.
To access an Interaction Page display:
1.
Bring up the maxVUE Runtime main menu.
2.
Click the System Status button on the standard Vertical Toolbar to
open the System Status display.
3.
Click the Int Page button appearing on the Horizontal Toolbar.
Use Interaction Page 9 to display the DPU configuration data sent by a
Work-Station. Refer to Figure 7-1.
Startup
The Startup? prompt appears when manual intervention is required,
following a cold startup or fatal alarm. For example, an I/O module fails and
is not configured as an alarm-only module.
Backup Option
DPUs can be paired in a redundant configuration as described in Chapter 5.
To configure the backup option, enter Y in the Backup field.
Metso Automation MAX Controls • • • • 277573 • • • •
Advertisement
Table of Contents
