Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HENNING MultiRope Series
Summary of Contents for HENNING MultiRope Series
- Page 1 MULTIROPE Operating Manual...
- Page 2 © Copyright 2016 by Henning GmbH & Co KG, Loher Str. 4, 58332 Schwelm Warranty This manual has been drawn up by Henning GmbH & Co. KG to the best of their knowledge. All technical statements have been carefully established an checked. They correspond to the state of the art.
-
Page 3: Table Of Contents
8. Alarm Limits........................ 10-11 9. How to Adjust the Display ....................11 10.a. CANopen Parameters (optionally) ................12 10.b. Electric Characteristics ....................13 11. Installation des Multirope ....................14 12. Operation Instructions in Brief ..................15 © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... -
Page 4: Connection Diagram
NO contact Yellow NC contact Grey COM contact Pink NO contact Black NC contact Violet COM contact Grey/Pink GY/PK NO contact Red/Blau RD/BU NC contact White/Green WH/GN COM contact © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... - Page 5 Color/Colour Abbreviation Description White Supply voltage 24 V DC Brown Ground Pink + Hold input Blue - Hold input Green Can H Yellow CAN L Grey CAN Gnd © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016...
-
Page 6: Alarm Relays
After ten minutes without any push of a button it changes into the energy-saving mode, i.e. the display goes off for being reactivated by the next push of a button. © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... -
Page 7: How To Adjust A Parameter
4.) After setting the last digit, press button again. After that the whole figure will be flashing. 5.) Press button once more to apply the adjusted parameter. © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... -
Page 8: Scheme Of Menu
(4 digits in the menu-item selected) calibrating of Multirope (cali) zero point adjustment (tara) state-changing thresholds of alarm-relays (alar) weight unit (unit) version number (Program-Version) CANopen (CANopen) © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... -
Page 9: How To Calibrate The Load Measuring
) if you are going to load ¾ of the nominal load only. As soon as you will have adjusted the last digit, the whole figure will be flashing. © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... -
Page 10: Alarm Limits
Changes its state, if the load of one of the supporting means differs by the limit adjusted in paramete from the average load of all ropes. © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... -
Page 11: How To Adjust The Display
Empty cabin equals 0% (Load) Weights are displayed in tons. The function sets the gross weight to zero; after that, only the net weight of the cabin shown. © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... -
Page 12: Canopen Parameters (Optionally)
At this point, the event time in milliseconds, i.e. the time interval at which the load is written to the CAN bus, can be set. A value of 0000 overrides this function. © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... -
Page 13: Electric Characteristics
125 V AC 0,3 A max. switching capacity 62 VA (resistive load) max. switching capacity 62 VA (inductive load) min. switching load DC 10 mV DC 0,01 mA Galvanically isolated © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... -
Page 14: Installation Des Multirope
Introduce the clamping brace over the 4 aligned bolts of the heel. Alternately tighten up the 4 nuts until the rope sits close against the heel of the clamping brace. © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... -
Page 15: Operation Instructions In Brief
Press times to confirm the adjustment. 5.) Connect the control lines to the lift controller and make sure that you accordingly choose the make- resp. break-contact. © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016... - Page 16 © Copyright 2016 by Henning GmbH & Co. KG Rev. 2.1 09/2016...
Need help?
Do you have a question about the MultiRope Series and is the answer not in the manual?
Questions and answers