Advertisement
How to mount myHome:
1
Insert SIM card
Push out the SIM card and insert it into the bottom
of the myHome control unit. The chip should face
downwards with the angled corner facing towards the
opening.
2
Connect power supply
Connect the cable supplied to the unit, and insert into
power socket. Turn on power.
3
The unit boots up ...
The small diode next to the power jack turns red. Wait
for 10 seconds..
The diode fl ashing regularly indicates that the unit is set
up correctly.
A continuous light or several quick fl ashes indicates that
SIM card is missing or inserted incorrectly..
4
Place the
myHome
unit correctly
Make sure to place the myHome unit, so that the heat
pump can "see" the infrared light of the unit.
5
Download the Profort myHome app
Download the FREE Profort myHome app for iOS or
Android.
6
Control myHome with your smart-
phone
See how to use myHome on the following pages:
Advertisement
