Table of Contents
Advertisement
• Support panels or any oversized workpiece to minimize the risk of wheel pinching and
kickback. Large workpieces tend to sag under their own weight. Supports must be placed under
the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel.
• Do not use excessively oversized sanding disc paper. Follow manufacturers
recommendations, when selecting sanding paper. Larger sanding paper extending beyond the
sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or
kickback.
• Be aware that wire bristles are thrown by the brush even during ordinary operation. Do not
overstress the wires by applying excessive load to the brush. The wire bristles can easily
penetrate light clothing and/or skin.
ATTENTION!!!
The returns will be impossible if products were damaged because of incorrect use.
DISPOSAL:
The packaging material is reusable. Dispose of the packaging in an environmentally
friendly way by putting it in the appropriate recyclable waste collection containers.
Dispose of the product and the batteries in view of the environment if you want to
separate. The device and the batteries must not be thrown in with domestic waste.
Take them to a recycling center for used electrical and electronic devices. For more information
you can consult your local government. Remove batteries first
Eurotops Versand GmbH
Elisabeth-Selbert-Straße 3
40764 Langenfeld, Germany
If technical support is needed, please call ...
in Germany
0180 . 530 63 63* or
in Austria
0720 204 001 or
in Switzerland
071/27 4 68 06 or
in the Netherlands
020262 1958 or
in France
0892 . 700 470** or
in Belgium
070 663 665*** or
* 14 Cents/minute via German landline, max. 42 cents/minute via mobile phone network
**35 Cents/minute via French landline
***30 Cents/minute via Belgium landline
A possible return of products should be addressed to the return address stated on your invoice.
.
info@eurotops.de
info@eurotops.at
info@eurotops.ch
info@eurotops.nl
info@eurotops.fr
info@eurotops.be
Hersteller Model Typ ref. NDCRK003602
Shanghai Nova Corporation
Room 402, Jiangtian Building No.3456
South Pudong Road,Pudong New Area
Shanghai,China
© 26.03.2020.
Made in P.R.C
Advertisement
Table of Contents
