Table of Contents
Advertisement
6. GRINDING
Grinding Stones
Materials
:
soft and hard metals (including stainless
steel), ceramic, stone, glass.The aluminium oxide
grinding stonesare great for cleaning up welded
joints,deburring castings, removing rust,cutting rivets,
sharpening tool blades or just general purpose grinding on
metals.
The grinding stones will wear out with use, and make
subsequent use uneven and hard to control for precision
work. These can be reshaped using the method below.
1.
Secure the unbalanced grinding stone in the rotary
tool.
2.
Turn on the rotary tool and run the whet stone
lightly against the revolving grinding stone. This
will remove high spots on the accessory.
Note:
Maintain a firm grip on the rotary tool and the whet stone. Do not apply excessive pressure
against the spinning grinding stone, let the whet stone and tool do the work.
WARNING!
WEAR SAFETY GLASSES, WELL FITTING GLOVES
AND BE MINDFUL ABOUT FINGER PLACEMENT WHEN
HOLDING THE WHET STONE AGAINST THE GRINDING
ACCESSORY.
7. CONTROL
S
CONTROLS
7.
On/Off Button
1.
Press the on/off button to turn the tool on. The
battery charge indicator LEDs will illuminate.
2.
To turn the tool off, press the on/off button
again.
Variable Speed Control
Once the tool is turned on, press the '+' button
to increase the speed.
Note:
The default speed of the tool when turned on is '3'.
Press the '+' and '-' buttons as appropriate to vary the
speed setting between 1 and 6.
Um die Geschwindigkeit zu reduzieren,
1.
drücken Sie die „-" Taste.
Advertisement
Table of Contents
