TP-Link CPE210 Installation Manual page 16

2.
The typical topology is as follows. A wireless bridge is built between two
locations that are far from each other. Follow the instructions below to
Computer
Access Point
LAN: 192.168.0.254
1. Log in to PharOS and go to the Quick Setup page.
Operation Mode: Select Access Point and click Next.
3. LAN Settings: Click Next.
4. Wireless AP Settings:
b. Select WPA-PSK/WPA2-PSK for the Security method and create
a PSK Password to protect your AP.
c. Enter the distance between the Access Point and the Client into
d. Select the
Finish: Verify your settings and click Finish to complete the
1. Log in to PharOS and go to the Quick Setup page.
Operation Mode: Select Client and click Next.
Client
LAN: 192.168.0.2
Next.
IP Camera