Auto Start-Stop System - Subaru CROSSTREK 2020 Quick Manual

OPERATING THE VEHICLE
AUTO START–STOP SYSTEM (CVT only)
The Auto Start-Stop system is designed to automatically stop and restart the engine when
the vehicle is stationary for a short period of time (while waiting for a traffic light or in a
traffic jam) after the engine has warmed up. The system operates in order to reduce fuel
consumption, exhaust emissions and undesired idling noise.
System Operation
So that it can be used safely and comfortably, in addition to driver operations, the Auto
Start-Stop system is designed to constantly monitor the vehicle conditions as well as the
environment inside and outside the vehicle, in order to control stopping and restarting the
engine.
After the vehicle has been completely stopped by depressing the brake pedal
with the select lever in the "D" position, the engine will be automatically
stopped and the green indicator will illuminate in the combination meter.
If you release the brake pedal with the select lever kept in the "D" position, the
engine will be automatically restarted. The indicator light will turn off when the system
restarts the engine.
There are several operating conditions for this system to operate as intended. For more
information, please refer to the Owner's Manual.
Fuel Saving Display
Once the Auto Start-Stop System has stopped
the engine, the screen to the right will display
in the Combination Meter Display (CMD),
showing how much time the engine was off in
the top line and the amount of fuel saved in
the bottom line. These are the total stop time
and fuel saved since the trip meter was reset.
No Activity Detected Indicator Light
If the operational conditions are not met when the vehicle is stopped, the
engine will not stop and the white Auto Start-Stop No Activity Detected
indicator light will illuminate. It will turn off when the brake pedal is released.
How To Turn ON/OFF The Auto Start-Stop
System
If the Auto Start-Stop OFF switch is pressed,
operation of the Auto Start-Stop system will
be disabled. The Auto Start-Stop indicator
light on the combination meter will then
31