Start/ Stop Engine; Ignition Switch (If Equipped) - Subaru Impreza 2016 Quick Reference Manual

Start/ Stop engine

Push-button ignition switch (if equipped)
Operation
indicator
To stop engine:
1. Stop the vehicle completely.
2. Move the select lever to the P position .
3. Press the push-button ignition switch.
Change of the power supply (Without starting engine)
Every time the button is pressed without depressing the brake pedal, the power is switched
in the sequence of OFF➞ACC➞ON➞OFF.
OFF (Turned off)

Ignition switch (if equipped)

The key can be turned from ACC to LOCK only when the key is pushed in while turning it (all
models) and the select lever is in the P position (CVT models).
4
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner's Manual.
To start engine:
1. Carry the access key, and sit in the driver's seat.
2. Apply the parking brake.
3. Shift the select lever into the P position.
4. Depress the brake pedal until the indicator on
the push-button ignition switch turns green.
5. While depressing the brake pedal, press the
push-button ignition switch.
ACC (Orange) ON (Orange)