3 sec
Press Enter to
to Exit
select this function
3 sec to
Next Menu
3 sec to
Next Menu
3 sec to
Next Menu
3 sec
to Exit
3 sec to
Next Menu
3 sec to
Next Menu
3 sec to
Next Menu
3 sec
Press Enter to
to Exit
select this function
3 sec to
Next Menu
3 sec to
Next Menu
3 sec
Press Enter to
to Exit
select this function
3 sec to
Next Menu
3 sec to
Next Menu
● If you are NOT SURE to proceed press up arrow keys ↑ 3 seconds. The unit will go to the
''MAN'' option.
● Press Enter key
● Use up or down arrow keys ↑ ↓ to select one option option.
● There are five fixed options and one adjustable. Press the enter key
● On ''ADJUST'' option use the up or down arrow key ↑ ↓ to increase or decrease value.
● When the value is ready, store it with the Enetr key
● To quit the option and return to the main menu press up arrow key ↑ for 3 seconds.
↑ ↓
3 seconds to exit without change
↑ ↓
3 seconds to exit without change
↑ ↓
3 seconds to exit without change
valve will move
valve will move
valve will move
valve will move
valve will move
valve will move
valve will move
valve will move
○
to select the option.
○
.
5- PID
3s
In this menu function, you can manually set the parameters Proportional Gain (KP), Integral
Time (TR) and Derivative Time (TD).
Selected
Value
5.1 – KP: Allows to adjust the proportional gain of the digital PID control from 0 to 50.
5.2 – TR: Allows to adjust the digital PID control integral time from 0.1 to 50 (s).
5.3 – TD: Allows to adjust the digital PID control derivative time from 0 to 10 (s).
○
● Press Enter key
3s
● Use up or down arrow keys ↑ ↓ to select one option and press the Enter key
Selected
● Use up or down arrow keys ↑ ↓ to increase or decrease the value. Hold it to fast increase or
Value
decrease.
● When the value is ready, store it with the Enter key
set the other if you want.
● If you want to quit the KP, Tr and Td setting, press the up arrow key ↑ for 3 seconds and
3s
return to main menu.
Selected
Value
6- ALARM
3s
In this menu function, it is possible to enable the alarm setpoint.
6.1 – E ALM: Enables positioner alarm on:
Selected
6.1.1 - LOWER: Allows to adjust the alarm range from 0 to 40% of the valve position.
Value
6.1.2 – UPPER: Allows to adjust the alarm range from 60 to 100% of the valve position.
6.2 – DESAB: Disable the alarm
● Press Enter key
● Use up or down arrow keys ↑ ↓ to select one option.
3s
● Press Enter key
Selected
● If you chose the "E ALM" option, use the up or down arrows to select ''UPPER'' or
Value
''LOWER'' option and press the Enter key
●Use up or down arrow keys ↑ ↓ to increase or decrease the value. Hold it to fast
Change digit
increase or decrease.
Select digit
● When the value is ready, store it with the Enter key
Confirm
to set the other if you want.
● If you want to quit the ALARM setting, press the up arrow key ↑ for 3 seconds and
return to main menu.
7- ACTION
In this menu function, it is possible to configure the valve action mode.
NO
7.1 –DIRECT: Direct action
3 sec
7.2 - REVERS: Reverse action
YES
● Press Enter key
● Use up or down arrow keys ↑ ↓ to select ''DIRECT or ''REVERS'' option.
● Press Enter key
● If you are SURE to proceed with the selected option press the Enter key
● If you are NOT SURE to proceed press up arrow keys ↑ 3 seconds.
● If you want to quit the ACTION options press the up arrow key ↑ for 3 seconds
NO
and return to main menu.
3 sec
YES
In this menu function, it is possible to define the operating mode of the valve.
8.1 - AUTO: The valve operates in automatic mode.
NO
8.2 - MAN: The valve operates in manual mode and can be moved to 0%, 25%, 50%,
3 sec
75%, 100% and "ADJUST" (User Adjustable).
YES
● Press Enter key
● Use up or down arrow keys ↑ ↓ to select ''AUTO or ''MAN'' option.
● Press Enter key
● If you select ''AUTO'' confirm with the Enter key
● If you are SURE to proceed with the selected option press the Enter key
NO
executes the option and goes to the next menu.
3 sec
YES
○
on the option desired.
Smart Valve Positioner for
Linear or Rotary Valves
to select this option
○
and return to KP, Td and Tr setting to
○
to select this option
○
to select the option"
○
.
○
to select this option
○
to select the option.
○
to select this option
○
to select the option.
○
3 sec to
Next Menu
Change digit
Select digit
Confirm
○
.
○
and return to ''E ALM'' setting
○
.
. The display will show SURE.
○
. The unit
3s
Selected
Value
2