Transports; Transport And Packing; Transport And Storage Environment Requirements; Transport Method - Bosch TCE 260 Operation Manual

en 8 | TCE 260 | Transports
$
Do not detach the bolts, nuts or the other compo-
nents from the machine;
$
Before cut off the power supply, you must not
contact the motor and the live parts on the machi-
ne such as power cord;
$
Carefully read the manual and learn how to use
the machine correctly and safely;
$
Keep the manual for the future reference.
Warning
Do not detach the danger decals, safety warnings and
operation tips on the machine. If there is any damage,
please contact the local dealer in time.
$
During the process of use and maintenance, the
operator should pay attention to the danger of the
high electrical voltage.
$
Do not modify the machine or use the non-original
parts unauthorized.
$
The operators must wear tight overalls, gloves,
goggle or safety shoes etc.
Warning
When the operator makes operation or maintenance,
it is forbidden to wear loose clothes, necklace or long
hair.
3.

Transports

3.1

Transport and packing

The machine should use the original package and then
be transported. The package should comply with the
following requirements.
R
The package size requirement:
Package size
Width 1150 mm
Length 1200 mm
Height 1050 mm
3.2 Transport and storage environment
requirements
Temperature : -25°- +55°C.
Warning
Do not place any other objects on the carton.
|
1 987 AT7 374 2015-09-02
3.3

Transport method

As shown in the figure,
Open the top package, plug the fork of the forklift from
bottom of the original package.
Note
Keep the original package for the future transporting.
4.

Unpacking

4.1 Unpacking
1. When unpacking, the operator should wear the pro-
per protective tool such as gloves.
2. Carefully check the packing list of the machine to
see if there is any mistake related to the quantity of
the parts. If there is any mistake, please contact the
dealer at once.
3. The objects in the carton, such as board, nails,
screws and plastic bags, should be located at the
safe place.
4. If there is any pollutant or the indecomposable sub-
stances, you should treat them as per the regulation
specified in t he local laws and regulations.
Warning
During the process of unpacking, assembly and trans-
porting, you should follow the following requirements
and handle with care. Or it will damage the machine.
5. Detach the upper cover of the carton and make sure
whether there is any damage or not during trans-
porting. Find the fix bolt to fix the machine on the
pallet and prepare to shift out the machine.
Robert Bosch GmbH