Outline; General Provision; Technical Parameter - Bosch TCE 260 Operation Manual

1.

Outline

1.1

General provision

1. This instruction is essential part for products. Please
carefully read the warnings and instructions inclu-
ded in manual before operation which also provide
important information regarding safety usage and
maintenance.
2. Properly keep this manual for the reference in the
future.
3. Careful reading the manual to make the operator use
the machine correctly, the dealer will provide long-
term and effective after-sales services. The producer
and dealers will not be responsible for the problems
caused by any incorrect operation.
4. Notes included in this manual:
R
Danger: The process can directly cause the serious
damage or death.
R
Warning: The unsafely process maybe cause the ligh-
ty or serious damage.
R
Note: The unsafely process can cause the serious
damage or death.
5. Before connect the power supply and air supply,
please carefully read the manual. Keep the operation
notes and warning notes on the manual and machi-
ne. The related information and data in the sales
process should be carefully kept. Different machine
will be equipped with different instruction manual.
The operators should pay attention to the effectiven-
ess of the manual.
Danger
You must use the machine in accordance with the requi-
rements specified in the manual. The manufacturer and
dealers won't be responsible for the problems caused
by any incorrect operations.
Warning
The machine must be operated by the professional
personnel. The operator must be fully understand the
manual and received the professional training. If the
nonprofessional personnel operate the machine, which
maby because the personal dangerous and also lead to
the damage to the tire and rim.
Robert Bosch GmbH
Notes
The pictures in the manual all comes from the original
design structure of the machine. The structure shown
may be different from the actual structure of the machi-
ne.
The machine is made for the purpose to give guidance
to the personnel with some basis of mechanical and
electrical skills. Therefore, the basic processes such
as how to fix the bolts may be omitted. Do not try to
letting the personnel without experience operate the
machine. If you have any requirement related to this,
please ask the dealer to provide the help.
1.2

Technical Parameter

1. Overall dimension
Length
Max. length
Width
Max. width during
operation process
Min. height
Max. heigt
Applicable wheels: standard tire, reverse tire, tire without center
hole, run flat tire.
2. Range of application
!
This machine is applicable for following range of
wheels:
Outside clamp
Inside clamp
Max. tire diameter
Max. tire width
3. Turntable styple
Plying-up style
Fix style
Clamping style
Drive style
Torque force
Turntable rotation speed
Outline | TCE 260 | 5
Overall dimension
A=1120mm
A1=1740mm
B=1050mm
B1=1550mm
H=1710mm
H1=2170mm
Range of wheels
10"~22"
12"~26"
1050mm
13"
Turntable style
Jaw
Jaw
Pneumatic
Motor
1100Nm
6rpm
|
1 987 AT7 374 2015-09-02
en