Samsung SyncMaster P50FP User Manual page 12

Power button [
Use this button for turning the PDP Display on and off.
Power indicator
Shows PowerSaver mode by blinking green
See PowerSaver described in the manual for further information regarding
power saving functions. For energy conservation, turn your PDP Display
OFF when it is not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the PDP Display.
Rear
Note
For detailed information concerning cable connections, refer to Connecting Cables under
Setup. The PDP Display 's configuration at the back may vary slightly depending on the PDP
Display model.
Introduction
]
Note
POWER IN
The power cord plugs into the PDP Display
and the wall plug.