Wall Bracket Assembly - Samsung SyncMaster 460UT-2 User Manual

• This product is for installing on cement walls. The product may not stay in place when
installed on plaster or wood.
Components
Only use the components and accessories shipped with the product.
Wall Bracket(1)

Wall Bracket Assembly

Note
There are two hinges(left and right). Use the correct one.
1. Insert and tighten the Captive Screw in the direction of the arrow.
When done, mount the wall bracket on the wall.
There are two hinges(left and right). Use the correct one.
A -
B -
C -
D -
2. Before drilling into the wall, check if the length between the two locking holes at the back
of the product is correct.
Introduction
Hinge(Left 1, Right Plastic
1) Hanger
(4)
Captive Screw
Wall Bracket
Hinge (Left)
Hinge (Right)
Screw Screw Anchor
(A)(11) (B)(4) (11)