Signal Balance; Signal Control - Samsung SyncMaster 400MX-3 User Manuals

The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
Note
Available in PC mode only.

Signal Balance

This is used to make up for the weak RGB signal transmitted by a long signal cable.
Note
• Not available when Dynamic Contrast is set to On.
• Available in PC mode only.
Signal Balance
Selects either On or Off with the signal balance.

Signal Control

Note
Available when Signal Balance is set to On.
1. R-Gain
2. G-Gain
3. B-Gain
4. R-Offset
5. G-Offset
6. B-Offset
Adjusting the LCD Display