Auto Adjustment
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
Available in PC mode only.
Signal Balance
This is used to make up for the weak RGB signal transmitted by a long signal cable.
•
•
Signal Balance
Selects either On or Off with the signal balance.
Signal Control
Available when Signal Balance is set to On.
1.
2.
3.
4.
5.
Downloaded From TV-Manual.com Manuals
Adjusting the LCD Display
Note
Note
Not available when Dynamic Contrast is set to On.
Available in PC mode only.
Note
R-Gain
G-Gain
B-Gain
R-Offset
G-Offset