Samsung 320BX User Manual page 59

2
Connecting and Using a Source Device
Source AutoSwitch Settings
Turning on the display with
active, the display will automatically search the different video input sources for active video.
If the display TV source is active (TV tuner connected to the display) the
function becomes inactive. The display will remain in the TV source.
Configuring Source AutoSwitch Settings
This product can only be controlled by using the remote control.
1
Press MENU
2
Press /
3
Press /
4
Press /
Source AutoSwitch
When the
for active video.
The Primary Source
Secondary source
If both the primary and secondary input sources are not recognized, the display will perform two
searches for an active source, each search checking the primary and then secondary source. If
both searches fail, the display will return to the first video source and display a message
indicating that there is no signal.
When the
inputs twice in sequence looking for an active video source, returning back to the first video
source in the sequence if no video is found.
S o u r c e A u t o S w i t c h S e t t i n g s
Press
Source AutoSwitch
on the remote control.
to move to Input and press [
to move to Source AutoSwitch Settings
to move to Source AutoSwitch
Source AutoSwitch is On, the display video source will automatically be searched
selection will be activated, if the current video source is not recognized.
selection will become active, if no primary video source is available.
Primary Source selection is set to All, the display will search all the video source
S o u r c e A u t o S w i t c h
P r i m a r y S o u r c e
S e c o n d a r y S o u r c e
M o v e
/ to select the option you want and press [
On, and the previous video source selection is not
].
and press [
and press [ ].
: O f f
: A l l
: P C
E n t e r R e t u r n
].
2 Connecting and Using a Source Device
Source AutoSwitch search
].
59