ZIGBEE SR-ZGP2801K4-CCT Instructions

CCT Zigbee Green Power Switch
Important: Read All Instructions Prior to Installation
Function introduction
Short press to turn on paired
devices,press and hold to
increase brightness smoothly
Short press to turn off paired
devices,press and hold to
decrease brightness smoothly
With Plastic Frame
13.27 mm
The remote control can be fixed on the wall with 3M glue or screw.
09.ZGPK4CT.04838
Short press to increase CW
and decrease WW by
CW
10%,press and hold to
increase CW and decrease
WW smoothly
Short press to increase WW
and decrease CW by
WW
10%,press and hold to
increase WW and decrease
CW smoothly
Front side
80.93 mm
Back side
With Glass Frame
10.10 mm
CW
WW
86mm
Product Data
Switch Type
Transmission Range
Radio Frequency
Power Supply
Buttons
Dimensions
Operating Temperature
Working Humidity
Waterproof Grade
Warranty
Product Description
The Zigbee green power switch is a wireless transmitter that communicates with a wide variety of Zigbee compatible
systems. The switch uses battery-free, energy-harvesting technology. Every time the switch is pressed, a micro-
generator produces a small electrical current that powers a built-in transmitter. This transmitter sends wireless radio
signals that are used to remotely control a compatible system.
Compatible With
Zigbee Green Power (included in Zigbee 3.0)
Safety & Warnings
• DO NOT expose the device to moisture.
The remote control can be fixed on the wall with 3M glue or screw.
Color temperature and dim control
10-30m (typical)
2.4GHz (Zigbee channels 11-26)
Self-generated when switch is pressed
4
80.9x80.9x13.3mm / 86x86x14mm
-20 ℃ ~ +45 ℃
10% ~ 95% RH non-condensing
IP20
5 years