Rear Panel; Remote Control; Setting The Remote Control - Samsung HT-XA100 User Manual

description

REAR PANEL

1 2 3
9 8
5.1 CHANNEL SPEAKER OUTPUT CONNECTORS
VIDEO OUTPUT JACK
COMPONENT VIDEO OUTPUT JACKS
TX CARD CONNECTION (WIRELESS)
HDMI OUT JACK
FM 75Ω COAXIAL JACK
External Digital Optical Input Jack
AUX IN 2 JACKS
COOLING FAN
12
4 5 6
7
Connect the front, center, rear, subwoofer speakers.
Connect the TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
Connect a TV with Component video inputs to these jacks.
The TX card enables communication between the main unit and the
optional wireless receiver amplifi er.
Use the HDMI cable, connect this HDMI output terminal to the HDMI input
terminal on your TV for the best quality picture.
Connect the FM antenna.
Use this to connect external equipment capable of digital output.
Connect to the 2CH analog output of an external device (such as a VCR)
The fan always revolves when the power is on. Ensure a minimum of 10
Cm of clear space on all sides of the fan when installing the product.

remote control

SETTING THE REMOTE CONTROL

You can control certain functions of your TV with this remote control.
When operating a TV with the remote control
1. Press the TV button to set the remote to TV mode.
2. Press the POWER button to turn on the TV.
3. While holding down the POWER button, enter the code
corresponding to your brand of TV.
•
If there is more than one code listed for your TV in the
table, enter one at a time to determine which code works.
Example : For a Samsung TV
While holding down the POWER button, use the number
buttons to enter 00, 15, 16, 17 and 40.
4. If the TV turns off, the setting is complete.
•
You can use the TV POWER, VOLUME, CHANNEL, and
Numeric buttons (0~9).
M

The remote control may not work on some brands of TVs. Also, some operations may not be possible
depending on your brand of TV.

If you do not set the remote control with the code for your brand of TV, the remote control will work on a
Samsung TV by default.
Operation Range of the Remote Control
The remote control can be used up to approximately
23 feet (7 meters) in a straight line. It can also be operated at a horizontal
angle of up to 30° from the remote control sensor.
13