Table of Contents
Advertisement
Instruction manual for: IIFF269177IDD | IIFF269177BSDD
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the
rating plate of the appliance:
Climate class
SN
N
ST
T
Location
The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.
Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance
is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall
unit must be at least 100mm. Ideally, however, the appliance should not be positioned below overhanging wall units.
Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet.
WARNING! It must be possible to disconnect the appliance from the mains power supply; the plug must therefore
be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic
power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this
purpose.
Daily Use
Using the Control Panel
Imported by iiglo, Østre Kullerød 4,
N-3241 Sandefjord, Norway
Made in China | www.iiglo.com
Ambient temperature
+10° C to +32° C
+16° C to +32° C
+16° C to +38° C
+16° C to +43° C
Buttons
A. Press to adjust temperature of freezer compartment (left side) from -14°C to -22°C.
B. Press to adjust temperature of fridge compartment (right side) from 2°C to 8°C
and off cooling.
C. Press to select running mode from SMART, ECO, SUPER COOLING, SUPER FREEZING
and USER'S SETTING (no symbol in display).
D. Press LOCK 3 S button and hold for 3 seconds to lock the other three buttons.
Press it and hold for 1 second to unlock the other three buttons.
9
Advertisement
Table of Contents
