Positioning; Location; Electrical Connection - Iiglo IIDE234W Instruction Manual

Instruksjonsmanual for: IIDE234W

Positioning

Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the
rating plate of the appliance:
SN
N
ST
T

Location

The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.
Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is
positioned below an overhanging wall unit, the minimum distance between the top of the cabi net and the wall unit
must be at least 100 mm. Ideally, however, the appliance should not be positioned below overhanging wall units.
Accurate leveling is ensured by one or more adjustable feet at the base of the cabinet.
Warning! It must be possible to disconnect the appliance from the mains power supply ; the plug must
lDtherefore beeasily accessible after installation.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic
power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this
purpose.
Imported by iiglo, Østre Kullerød 4,
N-3241 Sandefjord, Norway
Made in China | www.iiglo.com
+10 °C til +32 °C
+16 °C til +32 °C
+16 °C til +38 °C
+16 °C til +43 °C
11