Tape Drive Cleaning - Dell PowerEdge T440 Simple Operation Manual

To move the tape to the beginning of the file immediately before the file at the current
position, specify bsfm 2 with the 'mt' command:
# mt -f /dev/nst0 bsfm 2
EOF EOF EOF
ファイル 1 ファイル 2 ファイル 3
現在位置
rewind fsf 1
bsfm 1
bsfm2
File writing with 'tar' command
Specify /dev/st0 or /dev/nst0 as the write destination with the tar command:
# tar cvf /dev/nst0 <file name> <file name>...
File extraction with 'tar' command
Move to the beginning of the target file and read from /dev/st0 or /dev/nst0 with the tar
command:
# tar xvf /dev/nst0

Tape drive cleaning

When cleaning is required, "C" will be displayed on the character display. Insert only the
cleaning cartridge into the drive. When cleaning is complete, the cleaning cartridge will be
ejected.
8