Setting The Test Tone; Setting The Drc (Dynamic Range Compression) - Samsung HT-TWP32 Instruction Manual

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.
Press Cursor
1 In Stop or no disc 2
button to move to
mode, press
'Audio' and then
MENU button.
press ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button.
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop
mode.
•
Use this function to check that each speaker is correctly
connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
51
Press Cursor
3
to move to 'TEST
TONE' and then press
ENTER button.
•
The test tone will be sent to L
R RS LS SW in order.
If the ENTER button is pressed again
at this time, the test tone will stop.
L: Front Speaker (L) C: Center Speaker SW: Subwoofer
R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
Multi-Channel Pro Logic Mode
Start
Setting the DRC
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
button
C
(Dynamic Range Compression)
Press Cursor
1 2
In Stop mode,
button to move to
press MENU 'Audio' and then
press ENTER
button.
button.
Press Cursor
3 4
Press Cursor ,
button to move to
to adjust the
'DRC' and then
press ENTER
'DRC'.
button.
•
When the Cursor
the effect is greater, and when the
Cursor
smaller.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
GB
button is pressed,
button is pressed, the effect is
52