Advertisement
Connect the Metal Rods
8
There are four Metal Rods that need to be connected. Connect the male thread of the
metal rod to the female thread of the other. Repeat these steps for the other two Metal
Rods.
9
Make sure that the floor is clean and there are no sharp objects, then unroll the Screen
Fabric and place it gently on the floor with the viewing side facing down.
7
Insert the Metal Rods
10
Screen Fabric
Metal Rod
Insert the rest of the Metal
Rods to the Screen Fabric
pockets located at the edge.
The longer metal
rods are for the
horizontal frame pieces
and shorter rods are for the
vertical frame pieces.
11
Screen Fabric
Assembled Frame
According to the length of
the Metal Rods, match
each rod to the correct side
of the Screen Fabric,
then carefully insert each
Metal Rod into the
Screen Fabric pocket.
Metal Rod
After all four metal rods are
inserted, lay the Screen
Fabric onto the back of the
assembled frame.
WARNING
Do not force the Metal Rod as
it may exit the pocket and
damage the viewing area of
the screen.
8
Advertisement
