Advertisement
Place the Hanging Brackets
6
Hanging Brackets
Slide the two bottom
Hanging Brackets into the
track of the bottom frame.
Repeat these steps for the
top frame. The brackets
should be able to slide freely
along the frame track.
Bottom Horizontal Frame
Top Horizontal Frame
Hanging Brackets are used
to hang the projector screen
onto the wall.
Top
There are four Hanging
Brackets for each projector
screen. Two go on the top
and two on the bottom frame
track.
Bottom
Red arrows on
the Hanging
Brackets always point
upward.
5
Connect the Vertical and Horizontal Frame Pieces
7
Then, connect the secured
Horizontal Frame to the
Vertical Frame by inserting
Horizontal Frame
the other end of the Corner
Joint.
Tighten the screws
but do not over
tighten, adjustments can be
made later by loosening
the frame screws.
Insert the Corner Joint
into the assembled
Horizontal Frame Pieces
and tighten with the Frame
Screws by using the Allen Key.
Corner Joint
Vertical Frame
Tighten all the Frame
Screws to secure the corner
of the projector screen.
Repeat these steps until all
four corners are assembled
and secured.
6
Advertisement
