Advertisement
Preparation
1
2
Unpack all the parts in the
box, but do not unroll the
Screen Fabric yet.
IMPORTANT
Hardware is stored in a
separate box. Do not discard
this box!
QualGear logo is
on the bottom right
Frame Piece.
3
Unwrap the Frame Pieces, and lay
them out carefully.
Make sure that the assembly
area is clean and clear of debris
and sharp objects. At least two
feet of extra space is required
on all four sides when the
screen is spread out.
Hardware Box
Horizontal Frame
Then flip the Frame Pieces, so the metal
surface is facing upward.
3
Connect the Horizontal Frame Pieces
4
Horizontal Frame
Center Joint
Secure the Horizontal Frame Pieces
with the Frame Screws using the
Allen Key. Repeat these steps for the
other two Horizontal Frame Pieces.
The red arrow stickers specify
approximate locations of where
the Fabric Tensioners need
to be placed. Each arrow corresponds
to one opening on the screen fabric.
Place the Fabric Tensioners
5
Fabric Tensioner
Fabric Tensioner
Before connecting the corner Frame
Pieces, slide the Fabric Tensioners into
the track of the aluminum frame.
Line up the non-angled frame
ends of the Horizontal Frame
Pieces and slide the Center
Joint in the middle to connect
them.
Frame Screw
Allen Key
The red arrows on the frames indicate
how many Fabric Tensioners to insert for
each Frame Piece. Repeat these steps
for all the Frame Pieces.
4
Advertisement
