Setting The Delay Time - Samsung HT-P10 Instruction Manual

31P~60P(P10)-GB 2/1/05 10:45 AM

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of
the audio signals from the center and rear speakers.
41
Page 42
In Stop mode,
1
press MENU
button.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
•
With (Dolby Pro Logic II), the delay time may be different for each mode.
•
With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
Press Cursor button
2
to move to 'Audio' and
then press ENTER
button.