Setting The Delay Time - Samsung HT-DB600 Instruction Manual

Setting the Delay Time

49
More user manuals on
ManualsBase.com
Press Cursor button
1 2
to move to 'Audio' and
Press MENU button.
then press ENTER
button.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Press Cursor
Press Cursor button
3 4 , buttons to move
to move to 'DELAY
to the desired
TIME' and then press
speaker and then
ENTER button.
press ENTER button.
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than
the distance of Df in the figure, set the mode as
0ms. Otherwise, change the setting according to
the table.
Distance between Df and Dc Delay Time
20 Inches 1.3 ms
40 Inches 2.6 ms
5 feet 3.9 ms
6 feet 6.6 inches 5.3 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Ds and Dc Delay Time
6 feet 6.6 inches 5.3 ms
13 feet 3.3 inches 10.6 ms
20 feet 15.9 ms
, , Press Cursor ,
5 to set the Delay
time
•
You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
Ideal CENTER
SPEAKER placement
Ideal
SURROUND
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
50