Disc Playback - Samsung HT-P10 Instruction Manual

Hide thumbs Also See for HT-P10:
Table of Contents

Advertisement

1p~30p(P10)-GB
2/1/05 10:44 AM

Disc Playback

Press OPEN/
1
CLOSE button to
open the disc tray.
Note
Depending on the content of the disc, the initial screen may appear different.
To stop playback, press STOP during playback.
If pressed once, "PRESS PLAY" is displayed and the stop position will be stored in memory.
If PLAY/PAUSE (
(This function works only with DVDs.)
If pressed twice, "STOP" is displayed, and if PLAY/PAUSE (
beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
To resume playback, press PLAY/PAUSE (
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
By default, the video format is set to "PAL".
"NTSC" or "PAL" will appear in the display.
At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the video format of your TV.
17
Page 20
2
Load a disc.
Place a disc gently into the
tray with the disc's label
facing up.
) button or ENTER button is pressed, playback resumes from the stop position.
) button again.
Press OPEN/
3
CLOSE button to
close the disc tray.
DVD
Playback starts automatically.
) button is pressed, playback starts from the
VCD
CD

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-tp12

Table of Contents