Dab Related Functions - Samsung HT-DS470 Instruction Manual

41P~78P(DS470)-GB 9/16/04 9:34 AM

DAB Related Functions

To Initialize DAB
•
With the DAB function selected, press STOP on the main unit for longer than 5 seconds.
•
"DAB RESET" blinks on the display,then "PUSH TUNE" flash on the display. and the DAB
function will be reset to the default setting.
•
Once you have initialized DAB, you need to press the TUNE button to search the services again.
Page 69
Information Display Function
You can check various information about the service being received.
Press INFO.
•
Each time you press the button during reception, the mode
changes on the display as follows:
•
Depending on the service information, the display may vary or
does not work.
Note •
If no button is pressed for 7~8 seconds, you will be exited from the
Information Display function.
•
Small letters and some special characters (Ω, /, =, ?) cannot be displayed.
DLS (Dynamic Label Segment):
Teletext Display
This function may not work depending on the service
area and broadcasting circumstances.
Ensemble Label
Frequency
Bit Rate
Program Type (Pop, Classic, Rock, etc)
68