33P~74P(DB770)-GB
2004.9.16
DAB Related Functions
To Initialize DAB
•
With the DAB function selected, press STOP on the main unit for longer than 5 seconds.
•
"DAB RESET" blinks on the display,then "PUSH TUNE" flash on the display. and the DAB
function will be reset to the default setting.
•
Once you have initialized DAB, you need to press the TUNE button to search the services again.
9:42 AM
Page 61
Information Display Function
You can check various information about the service being received.
Press INFO.
•
Each time you press the button during reception, the mode
changes on the display as follows:
•
Depending on the service information, the display may vary or
does not work.
Note
•
If no button is pressed for 7~8 seconds, you will be exited from the
Information Display function.
•
Small letters and some special characters ( , /, =, ?) cannot be displayed.
DLS (Dynamic Label Segment):
Teletext Display
This function may not work depending on the service
area and broadcasting circumstances.
Ensemble Label
Frequency
Bit Rate
Program Type (Pop, Classic, Rock, etc)
62