Setting The Delay Time - Samsung HT-DS470 Instruction Manual

Table of Contents

Advertisement

41P~78P(DS470)-GB
9/16/04 9:34 AM

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
53
Page 54
In Stop mode,
1
press MENU
button.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
With
(Dolby Pro Logic II), the delay time may be different for each mode.
With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
Press Cursor button
2
to move to 'Audio' and
then press ENTER
button.

Advertisement

Table of Contents
loading

Table of Contents