Setting The Delay Time - Samsung HT-DM150 Instruction Manual

Setting the Delay Time

1
Press MENU button.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
47
Press Cursor button
Press Cursor
2
3
to move to 'Audio' and
to move to 'DELAY
then press ENTER
TIME' and then press
button.
ENTER button.
Setting CENTER SPEAKER
•
If the distance of Dc is equal to or longer than
the distance of Df in the figure, set the mode as
0ms. Otherwise, change the setting according to
the table.
Distance between Df and Dc
Setting REAR (SURROUND) SPEAKERS
•
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Ds and Dc
Press Cursor ,
button
4 , buttons to move
to the desired
speaker and then
press ENTER button.
Delay Time
50 1.3 ms
100
2.6 ms
150 3.9 ms
200 5.3 ms
It is desirable to place all speakers within this circle.
Delay Time
Df: The distance from FRONT SPEAKER
200 5.3 ms Dc: The distance from CENTER SPEAKER
400 10.6 ms Ds: The distance from SURROUND SPEAKER
600 15.9 ms
,
Press Cursor ,
5
to set the Delay
time.
•
You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
Ideal CENTER
SPEAKER placement
Ideal
SURROUND
SPEAKER
placement
48