Setting Up The Optional Dell Wr517 Wireless Receiver - Dell 7760 User Manual

Setting up the Optional Dell WR517 Wireless Receiver

Dell WR517 wireless receiver enables your Windows laptop computer,
Android smartphone or tablet with Miracast capability to display the screen
image to Dell 7760 using a Wi-Fi Direct interface.
The Dell WR517 wireless receiver features include:
• Wireless connectivity via IEEE 802.11 ac (Wi-Fi), bluetooth and Screencast.
• The connectivity makes it simple and easy to connect with legacy and new
systems.
• Dell Wireless Monitor drivers/app to support additional/enhanced HID
sharing features will be included for Windows 10, Windows 8.x and
Windows 7.
The Dell wireless module is not shipped with your 7760 projector. You can
purchase it on the Dell website at www.dell.com.
Connecting your Dell WR517 wireless receiver with Dell 7760 projector:
1
Use a Philips crosshead screwdriver to fasten the two screws (shipped with
the receiver) to the mounting rack on the rear of your projector.
2
Align the mounting holes of the Dell WR517 wireless receiver with the two
screws that were secured on the rear side of the projector, and then push
the receiver downward until it is locked it into place.
3
Connect the micro USB cable (supplied with the receiver) from the Dell
WR517 wireless receiver to the USB port on the projector to get power.
4
Connect the HDMI cable (supplied with the receiver) from the Dell WR517
wireless receiver to the projector.
5
Connect your USB cable from the Dell WR517 wireless receiver to your
USB keyboard and mouse.
6
Turn On the projector and the Dell WR517 wireless receiver will be
activated at the same time.
24 Connecting Wireless Display Adapter