Setting The Test Tone - Samsung HT-DB750 Instruction Manual

Setting the Test Tone

1
Press MENU button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
When manually testing using the TEST TONE button
Press TEST TONE button.
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.
•
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button.
Press Cursor
2
button to move to
'Audio' and then
press ENTER button.
L: Front Speaker (L)
R: Front Speaker (R)
Multi-Channel Pro Logic Mode
Start
Press Cursor
3
to move to 'TEST
TONE' and then press
ENTER button.
The test tone will be sent to L ➝ C ➝
•
R ➝ RS ➝ LS ➝ SW in that order.
If the button is pressed again at this
time, the test tone will stop.
C: Center Speaker SW: Subwoofer
LS: Rear Speaker (L) RS: Rear Speaker (R)
44
button